# Disable continuous LED feedback from VMBGP4B

**URL:** <https://forum.velbus.eu/t/disable-continuous-led-feedback-from-vmbgp4b/14915>\
**Category:** English\
**Created:** [January 4, 2018, 12:55pm UTC](https://forum.velbus.eu/t/disable-continuous-led-feedback-from-vmbgp4b/14915 "2018-01-04T12:55:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pcleemputte](https://forum.velbus.eu/letter_avatar_proxy/v4/letter/p/cdc98d/32.png) [@pcleemputte](https://forum.velbus.eu/u/pcleemputte)\
**Post date:** [January 4, 2018, 12:55pm UTC](https://forum.velbus.eu/t/disable-continuous-led-feedback-from-vmbgp4b/14915/1 "2018-01-04T12:55:55Z")

</div>

In each bed room I have a VMBGP4 that is used to control a VMB2BLE to open and close the blinds of two windows. When the blinds are going up or down the appropriate LEDs of the VMBGP4B are blinking which is great. However, when the blinds are fully up or down the LED(s) of the last-used button(s) remain lit continuously. This annoys my kids who are used to sleeping in complete darkness.

Is it possible to disable the continuous feedback of the LEDs at the end of the open/close action while keeping the blinking feedback during the action?

kind regards,

Patrick

---

<div class="post-metadata">

**Author:** ![Velbus345](https://forum.velbus.eu/user_avatar/forum.velbus.eu/velbus345/32/4074_2.png) [@Velbus345](https://forum.velbus.eu/u/Velbus345)\
**Post date:** [January 8, 2018, 9:05am UTC](https://forum.velbus.eu/t/disable-continuous-led-feedback-from-vmbgp4b/14915/2 "2018-01-08T09:05:24Z")

</div>

No, unfortunately this is not possible at this time. Your problem is noted and we’ll see if we can integrate this in a future firmware upgrade for the blind modules…