# Signum / Raspberry pi 3 / Home assistant

**URL:** <https://forum.velbus.eu/t/signum-raspberry-pi-3-home-assistant/17291>\
**Category:** Nederlands\
**Created:** [November 24, 2023, 9:33pm UTC](https://forum.velbus.eu/t/signum-raspberry-pi-3-home-assistant/17291 "2023-11-24T21:33:14Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![LL8](https://forum.velbus.eu/letter_avatar_proxy/v4/letter/l/a3d4f5/32.png) [@LL8](https://forum.velbus.eu/u/LL8)\
**Post date:** [November 24, 2023, 9:33pm UTC](https://forum.velbus.eu/t/signum-raspberry-pi-3-home-assistant/17291/1 "2023-11-24T21:33:14Z")

</div>

Hallo,

Ik ben wat aan het experimenteren met Home Assistant en gebruik hiervoor een Raspberry pi 3b+.  
Mijn SMA omvormer, Nibe warmtepomp, sonos, tv, etc. zijn probleemloos al geïntegreerd. Al dan niet door de modbus in te schakelen.

Ik wil graag de Velbusintegratie toevoegen aan HA, maar lijkt me niet te lukken.  
Heb nochtans alle stappen overlopen volgens zoals hieronder beschreven:

> **[Velbus](https://www.home-assistant.io/integrations/velbus#services)**
>
> Access and control your Velbus devices.

De VMBSIG heb ik via een usb kabel verbonden met mijn RB.  
Heb in HA alle mogelijke verbindingsreeksen al geprobeerd, waaronder:

- /dev/ttyACM0
- /dev/ttyUSB0 (met variaties in /dev/ttyUSB1,2,3, enz…)

Enkel via ’ /dev/ttyAMA0’ kon ik schijnbaar de velbus integratie toevoegen.  
Echter geen apparaten of entiteiten zichtbaar.

Hulp gevraagd 🙂

---

<div class="post-metadata">

**Author:** ![MDAR](https://forum.velbus.eu/user_avatar/forum.velbus.eu/mdar/32/4215_2.png) [@MDAR](https://forum.velbus.eu/u/MDAR)\
**Post date:** [November 25, 2023, 9:20am UTC](https://forum.velbus.eu/t/signum-raspberry-pi-3-home-assistant/17291/2 "2023-11-25T09:20:58Z")

</div>

Hi

Have you tried to via TCP ?

---

<div class="post-metadata">

**Author:** ![LL8](https://forum.velbus.eu/letter_avatar_proxy/v4/letter/l/a3d4f5/32.png) [@LL8](https://forum.velbus.eu/u/LL8)\
**Post date:** [November 25, 2023, 12:02pm UTC](https://forum.velbus.eu/t/signum-raspberry-pi-3-home-assistant/17291/3 "2023-11-25T12:02:25Z")

</div>

Hi,

Thanks for the reply.

I did use " 127.0.0.1:3678 " allready. (as indicated in the HA instructions)  
However, not sure if that is correct?

My signum IP is 192.168.0.233, So i tried 192.168.0.233:8080 and was once again able to integrate velbus. But again no devices or entities visible.

Am i missing something?

---

<div class="post-metadata">

**Author:** ![MDAR](https://forum.velbus.eu/user_avatar/forum.velbus.eu/mdar/32/4215_2.png) [@MDAR](https://forum.velbus.eu/u/MDAR)\
**Post date:** [November 25, 2023, 1:20pm UTC](https://forum.velbus.eu/t/signum-raspberry-pi-3-home-assistant/17291/4 "2023-11-25T13:20:55Z")

</div>

You’re nearly there

Within Signum, what are the TCP connection details for Velbuslink?

Use those within your HA configuration and you should be up and running.

@cereal  
Is this correct?

* * *

> [@LL8](#):
>
> I did use " 127.0.0.1:3678 " already. (as indicated in the HA instructions)

Be aware that those instructions assume that the Velbus-TCP or VelServ application are running on the **same** machine as your HA instance.

In this situation, you want to access your Velbus network **via** the TCP gateway within Signum, across your LAN.

Do you have the original Signum?

Did you know you can apply for an transfer to their (limited) HA version.

However, you’re probably better off staying on the road you’re already on.

---

<div class="post-metadata">

**Author:** ![LL8](https://forum.velbus.eu/letter_avatar_proxy/v4/letter/l/a3d4f5/32.png) [@LL8](https://forum.velbus.eu/u/LL8)\
**Post date:** [November 25, 2023, 3:39pm UTC](https://forum.velbus.eu/t/signum-raspberry-pi-3-home-assistant/17291/5 "2023-11-25T15:39:40Z")

</div>

Any clue how to find that?  
I looked into signum config, but didnt find anything.  
I also looked into velbuslink, same result.

Many thanks for the help.

---

<div class="post-metadata">

**Author:** ![MDAR](https://forum.velbus.eu/user_avatar/forum.velbus.eu/mdar/32/4215_2.png) [@MDAR](https://forum.velbus.eu/u/MDAR)\
**Post date:** [November 25, 2023, 4:08pm UTC](https://forum.velbus.eu/t/signum-raspberry-pi-3-home-assistant/17291/6 "2023-11-25T16:08:57Z")

</div>

> [@LL8](#):
>
> Any clue how to find that?

You should be able to find it via the web interface on your Signum.

It’ll be in a different place, depending on which firmware you have.

Try looking in the “settings” or “Network access” section? (Purely a guess)

(Mine isn’t powered up right now, as it’s in a demo case, ready for taking to a college on Monday)

 ![PXL_20231125_173825101](https://forum.velbus.eu/uploads/default/original/2X/6/6a6fe1328489417643613f1e41900c0cdfd0b9f2.jpeg)

---

<div class="post-metadata">

**Author:** ![cereal](https://forum.velbus.eu/user_avatar/forum.velbus.eu/cereal/32/1240_2.png) [@cereal](https://forum.velbus.eu/u/cereal)\
**Post date:** [November 27, 2023, 9:15am UTC](https://forum.velbus.eu/t/signum-raspberry-pi-3-home-assistant/17291/7 "2023-11-27T09:15:19Z")

</div>

in velbuslink you can discover the signum, it will shw you the ip address:

in hass you should use:

tls://ip-address:27015

---

<div class="post-metadata">

**Author:** ![LL8](https://forum.velbus.eu/letter_avatar_proxy/v4/letter/l/a3d4f5/32.png) [@LL8](https://forum.velbus.eu/u/LL8)\
**Post date:** [November 29, 2023, 7:28pm UTC](https://forum.velbus.eu/t/signum-raspberry-pi-3-home-assistant/17291/8 "2023-11-29T19:28:33Z")

</div>

Hi everyone,

The trick that did it:

In signum i was able to enable tls/ssl and now i can see my first devices and entities.

Thanks for the help, leared a lot!

---

<div class="post-metadata">

**Author:** ![EvAndy](https://forum.velbus.eu/letter_avatar_proxy/v4/letter/e/dc4da7/32.png) [@EvAndy](https://forum.velbus.eu/u/EvAndy)\
**Post date:** [December 15, 2023, 9:33am UTC](https://forum.velbus.eu/t/signum-raspberry-pi-3-home-assistant/17291/9 "2023-12-15T09:33:32Z")

</div>

Oh… very tidy!

What cabinet is that? Did they come with DIN rail already fitted and slotted trunking or did you make those yourself?

How did you do those neat printed cable labels?

- Andy

---

<div class="post-metadata">

**Author:** ![MDAR](https://forum.velbus.eu/user_avatar/forum.velbus.eu/mdar/32/4215_2.png) [@MDAR](https://forum.velbus.eu/u/MDAR)\
**Post date:** [December 15, 2023, 10:55am UTC](https://forum.velbus.eu/t/signum-raspberry-pi-3-home-assistant/17291/10 "2023-12-15T10:55:29Z")

</div>

😊  
Thanks Andy.

> [@EvAndy](#):
>
> What cabinet is that? Did they come with DIN rail already fitted and slotted trunking or did you make those yourself?

Those beauties are from Future Automation, all ready to go with rails and containment.

[https://www.futureautomation.net/Product/Velbus](https://www.futureautomation.net/Product/Velbus)

FA also offer a full Pre-Assemble, Wire & Testing service.  
Tell them what Velbus hardware you want in the cabinet and it gets shipped to site, ready to be hung on the wall and terminated.

I can even pre-program the Velbus hardware if needed…

Just a little to late for you project… Unless … 🚛 You’re on the move again?

> [@EvAndy](#):
>
> How did you do those neat printed cable labels?

Oh yeah, I do like those too.

They get a bit messy when there are loads of them, but they are rather nice.

NIIMBOT D110  
Battery powered, Bluetooth label printer

The one I have can use multiple label widths

> **[D101 Inkless Label Printer with Tape - Effortless Labeling Made Easy](https://niimbots.com/products/niimbot-d101-wireless-label-printer-with-tape)**
>
> Label refills for D101 \>\> ➿ No ink needed， easy to create and print your own label on free App【NIIMBOT】， Print 10-25mm width label paper ✨D11 stickers can be applied to D101 printer 【Features】 No ink、Without carbon belt Thermal...

Or there is the slim label only version

> **[D110 Label Printer with Tape - Efficient Labeling On-the-Go](https://niimbots.com/products/d110-portable-wireless-connect-rechargeable-mini-label-printer-with-tape)**
>
> Label refills for D110 \>\> Keep your Home & Office Organized This portable D110 label maker with tape is different from the traditional label maker. Designed in cute and compact style, it is lighter and smarter, and you can take it...

With a wonderful selection of labels

Watch out for the deals !

I always buy WAY TOO MANY 😆
