# VelbusLink 8.1 and synchro?

**URL:** <https://forum.velbus.eu/t/velbuslink-8-1-and-synchro/5502>\
**Category:** English\
**Created:** [December 16, 2011, 8:03am UTC](https://forum.velbus.eu/t/velbuslink-8-1-and-synchro/5502 "2011-12-16T08:03:44Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Golfy](https://forum.velbus.eu/user_avatar/forum.velbus.eu/golfy/32/4985_2.png) [@Golfy](https://forum.velbus.eu/u/Golfy)\
**Post date:** [December 16, 2011, 8:03am UTC](https://forum.velbus.eu/t/velbuslink-8-1-and-synchro/5502/1 "2011-12-16T08:03:44Z")

</div>

Since VelbusLink 8.1, I’ve problem with programming VMB4PD.

1. I change configuration (ie. Button4 = Dimmer 25%, change Button4 = Dimmer 40%)
2. I click Synchronize
3. I click Write (module is auto-selected)
4. I push my button… no change (dimmer still 25%)

I would to know if I’ve to select the dimmer module too ? or what I’ve to do to obtain my new program…

For information, I’ve tried with 2 other WMB4PD especially my VMB4PD MASTER : Button4 = CloseALL (OFF for all relays). I try to Close ALL but not Christmas plug. I remove Christmas plug from the VMB4PD list (synchronize and write)… unfortunely, Button4 still close this plug.

An other information : I’ve tried direct connection (COM4) and through Velbus server (ethernet). The two way give the same result.

Any idea ?

---

<div class="post-metadata">

**Author:** ![VEL448](https://forum.velbus.eu/user_avatar/forum.velbus.eu/vel448/32/4186_2.png) [@VEL448](https://forum.velbus.eu/u/VEL448)\
**Post date:** [December 16, 2011, 1:27pm UTC](https://forum.velbus.eu/t/velbuslink-8-1-and-synchro/5502/2 "2011-12-16T13:27:36Z")

</div>

You need to synchronize the ‘subject’ of an action, in this case a dimmer/relay

It is your dimmer/relay that knows which button it needs to react to

[![](https://www.velleman.eu/images/tmp/toggle.png) ](https://www.velleman.eu/images/tmp/toggle.png)

---

<div class="post-metadata">

**Author:** ![Golfy](https://forum.velbus.eu/user_avatar/forum.velbus.eu/golfy/32/4985_2.png) [@Golfy](https://forum.velbus.eu/u/Golfy)\
**Post date:** [December 16, 2011, 4:52pm UTC](https://forum.velbus.eu/t/velbuslink-8-1-and-synchro/5502/3 "2011-12-16T16:52:09Z")

</div>

Well VelbusLink 7 was able to automaticaly synchronize both modules.  
With VelbusLink 8, I’ve to select manually other modules ☹

Why this function hasn’t been kept ?

---

<div class="post-metadata">

**Author:** ![VEL448](https://forum.velbus.eu/user_avatar/forum.velbus.eu/vel448/32/4186_2.png) [@VEL448](https://forum.velbus.eu/u/VEL448)\
**Post date:** [December 19, 2011, 7:52am UTC](https://forum.velbus.eu/t/velbuslink-8-1-and-synchro/5502/4 "2011-12-19T07:52:48Z")

</div>

Because it didn’t work correctly
