Velbuslink gebruiken via Home Assistant op Raspberry PI5

[MDAR]

@SergeVG

Hiervoor zou een velserv1.5.zip moeten geïnstalleerd worden heb ik begrepen, maar die is nergens te vinden.

How-To : Install and Run VelServ - a Velbus TCP Gateway

Hi @MDAR , I’m trying to re-install velserv with your script. It worked before, but now I’m getting a “could not resolve www.mdar.co.uk” error when I try to do “wget http://www.mdar.co.uk/dl/velserv-setup.sh” Any ideas? I wanted to re-install velserv because I noticed it’s using A LOT of CPU since I did an update of my DietPi installation yesterday. It was idling before, but now it uses 50 - 75% of CPU consistently… Thanks for your help!

That’s on my website, which references @jeroends site to get the latest version.

https://www.mdar.co.uk/dl/velserv-setup.sh

https://www.mdar.co.uk/dl/velserv1.5.zip

However, I would suggest you look at the official Velbus TCP gateway software

GitHub - velbus/velbus-tcp-snap: Snap package for python-velbustcp

Bridging Velbus with TCP through snap package

Hello everyone We’ve made a snap package to easily run a Velbus TCP gateway on any snapd-compatible Linux distribution. To install, simply run these two commands; snap install velbus-tcp snap connect velbus-tcp:raw-usb :raw-usb The server will now listen at 27015 (which you can connect to with VelbusLink). Source code and further information can be found at https://github.com/velbus/velbus-tcp-snap

You can find a setup script on my website
https://www.mdar.co.uk/dl/velbus/velbus-tcp.sh

wget https://www.mdar.co.uk/dl/velbus/velbus-tcp.sh

sudo sh velbus-tcp.sh